• :
  • :

Tips before buying a meat grinder: which one to buy?

A meat grinder is a really practical tool because it allows people to control the quality of the products they will consume. And, when you buy directly the ground meat, you run the risk that it is of low quality, so difficult to predict what will be the final result. It could be thought that they are typical of butchers, but the fact that domestic choppers have appeared at very affordable prices has triggered the sales of this small appliance.

How a meat grinder works

A meat grinder is a kitchen utensil that consists of a spiral shaft that, as it moves through a lever designed for such effects, pushes the meat towards a series of blades that have the shape of a helix. So that finally, it leaves cut by the holes of the apparatus, also of metal. Nowadays, the procedure has become much simpler with the arrival of electric models that only have to put the meat and let it make different types of thickness in the cuts. Get all the Meat grinder reviews in one place so you can have better idea of which model you want to buy.

The price

Depending on the price of the product varies in its capabilities, everything will depend on the budget allocated for it and of course, the machine you want to buy. There are cheap meat grinders that cost 20 Dollars, or less. These are fairly rudimentary and basic models, almost always manual but quite compliant in the basics.

Types of mincer

Depending on the amount of use you can choose between the two basic types of choppers. You can get the manual type and on the one hand are the automatic. It works mostly with cranks. It drives the meat to the blades that are in charge of doing the work. Depending on the type of blade you can also vary the chopped meat. Depending on what they are made can also vary the life time. They are usually come in the form of a cross.

The entrance of the meat

Most meat grinders have a hole to introduce meat. Depending on the size of the chopper, the mouth to introduce the meat may be larger, or smaller. Sometimes it is an elongated tube through which it is introduced what is going to chop because through this method it is guaranteed that only the amount that can be chopped will arrive at the blades, so that it is not overloaded especially if it is electric since they overheat and can be damaged.

Conclusion: The disks

In the hole of exit of the minced meat is installed a disc that will determine the size of the cut. Many models come with several discs that vary in their dimensions, so that the person can choose several types of cut without too many complications. In this case, it is really important to know how to install them and make sure they are fairly well adjusted because this is essential for the process to proceed normally and safely.